Specifications

This article applies to the following O3 series multisensors:

Model Name	Hardware Revision
O3-SENSE-00	R1.0c
O3-SENSE-00-B	R1.f
O3-EDGE-02	R1.0c
O3-EDGE-02-E8	R1.0c
O3-EDGE-02-E9	R1.0c
O3-EDGE-02-S	R1.0e.C
O3-EDGE-02-B	R1.f
O3-EDGE-02-E8-B	R1.f
O3-EDGE-02-E9-B	R1.f
O3-EDGE-02-S-B	R1.f

Specifications

Power Consumption	24 VDC (20–28 VDC), 2 W typical, 10 W max, Class 2
Ambient Rating	0°C to 45°C (32°F to 113°F) 10% to 95% RH (non-condensing)
Communication Ports	Dual Ethernet (10/100Base-T)
Interfaces and Protocols	BACnet (BACnet/IP, BACnet/Ethernet/BACnet/SC) MQTT v3.1.1 Bluetooth® Low Energy 5.0 EnOcean 868 MHz or 902 MHz (EDGE-E8/E9 models only)
Sensors	Temperature Digital temperature sensor ± 0.5°C (± 1.0°F) Infrared temperature sensor typical ± 1.0°C (± 1.8°F) Composite temperature value ± 0.5°C (± 1.0°F) typical with calibration
	Humidity Sensor Accuracy ± 3% for 20% to 80% RH @ 15°C to 30°C (59°F to 86°F)
	Motion Sensor Passive infrared (PIR) motion sensor range for minor motion: •  5.5 m (18 ft) diameter coverage mounted on a 2.4 m (8.0 ft) ceiling •  9.1 (30 ft) diameter coverage mounted on a 4.6 m (15 ft) ceiling
	Light Sensor ± (6 + 5% reading) lx
Audio	Audio Input 2 microphones for acoustic occupancy detection
	Audio Output 1.0 W mono speaker for tones and audio output Volume adjustable to max 70 dB SPL @ 1 m from 300 to 3400 Hz
Universal Points (EDGE models only)	Up to 2 inputs (16-bit), software configurable for the following types: • 0–5 VDC • 0–10 VDC • 10 kΩ thermistor • Dry contact (using 10 kΩ thermistor software setting) • 4–20 mA (using external 250 Ω resistor on 0–5 V setting)
	Up to 2 outputs (12-bit), software configurable for the following types: • 0–10 V @ 20 mA max (sourcing) • 1–10 V @ 10 mA max (sinking)
Compliance	CE FCC/IC NCC (in progress)
Listings	cULus 916 Listed

Compliance and conformance documents are available under the Resources section.