How the LED ring works

Creating a Custom Light Ring Color

The light ring consists of red, green, and blue LEDs. You can create custom colors by adjusting the intensity of the component LEDs.

To create a custom light ring color:

1. Command object BV7 (Light Ring Activate Custom Colors) to manual mode and set the object value to On.
2. Open one or more of the following objects: AV3 (Light Ring Custom Color Red), AV4 (Light Ring Custom Color Green), or AV5 (Light Ring Custom Color Blue).
3. Set the object(s) to manual mode.
4. For each object, enter an object value between 0 (Off) and 100 (full intensity) and save your changes.

Possible light ring color settings include the following:

Color	Red (AV3)	Green (AV4)	Blue (AV5)
Red	100	0	0
Green	0	100	0
Blue	0	0	100
Cool White	100	100	50
Yellow	100	50	0
Orange	100	25	0
Pink	100	0	25
Teal	0	100	50

The light ring displays the custom color until object BV7 is set to Off.

Light ring commands are processed in the following order: Device status display BV8 (highest priority) > Light ring brightness AV6 > Activate custom light ring color BV7 > Play light ring pattern MV1 (lowest priority).

Light Ring Patterns

State	Name	Description	Color
1	Idle (Off)	No pattern is displayed.	None
2	Blue Swirl	Light circles ring once, followed by two short flashes, followed by long flash.	Blue
3	Fast Blue Swirl	Same as above but faster.	Blue
4	Power On	Light circles ring three times.	Green
5	Occupancy Active	Light circles ring three times.	White
6	Got Request	Three short flashes.	Green
7	Heating Active	Light ring fades in and out.	Red
8	Cooling Active	Light ring fades in and out.	Blue
9	Don't Understand	Four short flashes, followed by long flash.	Yellow
10	Error	Eight short flashes.	Red
11	Alarm	Sixteen short flashes on alternating sides of ring.	Red
12	Christmas	Sixteen short flashes in alternating colors.	Red and green
13	Awake and Waiting	Light circles ring once, followed by long flash.	Blue